Search float button
1-888-996-4266

Micom offre des essais pour l’industrie automobile pour une panoplie de matériaux, produits et sous-assemblages. Que ce soit pour les essais en chambres climatiques, les essais UV, Les essais de peinture, les essais d’emballage ou encore les essais de matériaux, nos experts se feront un plaisir d’élaborer un programme d’essai adapté à vos besoins.

Ayant en main plusieurs années d’expertise en essai de technologie spécialisée, une expérience étendue et un engagement à prendre soin de nos clients, notre équipe d’experts fait plus que tester vos produits. Micom s’engage à livrer pour l’automobile un service d’essai exceptionnel pour tous ses clients.

Service d’essais

Automotive testing
Overheating gaz lift upon fatigue cycling

Micom offre un large éventail d’essais mécaniques et physico-chimiques pour l’industrie automobile selon différentes méthodes (ASTM, SAE, MIL-STD, ISTA, ANSI, CSA, BRP, GM et plusieurs autres). Nos spécialistes sont aussi en mesure de réaliser des essais de matériaux personnalisés et adaptés à vos besoins afin de rencontrer certains critères spécifiques.

Notre laboratoire nous permet de tester une panoplie de matériaux bruts et produits finis. Que votre besoin soit pour des essais de cyclage thermique, de matériaux composites, de corrosion accélérée ou de vieillissement accéléré, le personnel de Micom est toujours disponible pour vous assister dans vos besoins techniques.

Notre laboratoire d’essai automobile est aussi en mesure de tester des prototypes et sous assemblages afin de simuler une utilisation intensive du produit ou matériaux, afin de valider une conception ou encore investiguer une défaillance en utilisations. Notre laboratoire est accrédité par l’A2LA des Normes selon ISO 17025.

Micom offre un large éventail d’essais de matériaux. Parmi nos clients nous avons Volvo, BRP, Weber et bien d’autres.

Automotive Testing « à la Carte »

Exposition climatique, UV et à la corrosion

Voici quelques uns des tests de vieillissement accéléré que nous offrons:

Essais Chrysler

  • LP-463AB-54-01 (Shear Strength)
  • LP-463CB01-02 (Adhesives Shear Strength of Solvent Release Pressure)
  • LP-463CB-10-01 (Adhesives – Heat Humidity and Cold Aging Test for Adhesives)
  • LP-463DD-07-01 (Plastics – Cold Tests of Plastic Materials)
  • LP-463DD-08-02 (Plastics – Accelerated Service Temperature)
  • LP-463KB-02-01 (Breaking Strength and Elongation Testing of Soft Trim Materials)
  • LP-463KB-03-01 (Tear Strength of Soft Trim Materials)
  • LP-463KB-06-01 (Wear Resistance of Soft Trim Materials)
  • LP-463KB-07-01 (Fadeometer Testing – Automotive Interior Trim)
  • LP-463KB-12-01 (Fabrics – Weatherometer Test of Automotive Type Trim)
  • LP-463KB-21-01 (Wear Resistance of Trim Materials – Taber Method)
  • LP-463KB-25-01 (Fabric – Relative Stiffness in Flexure of Automotive)
  • LP-463LB-10-01 (Bond Strength of Trim Materials)
  • LP-463LB-12-01 (Resistance to Humidity Hot and Cold Cycling of Trim Materials Test)
  • LP-463LB-13-01 (Leather – Heat Aging of Trim Materials)
  • LP-463PB-11-01 (Measurement of Specular Reflection)
  • LP-463PB-15-01 (Adhesion and Toughness)
  • LP-463PB-22-01 (Cycle Testing of Painted Surfaces)
  • LP-463PB-52-01 (Chipping Corrosion Test)
  • LP-463TB-03-01 (Tapes and Films – Peel Strength and Adhesion – Determination of)
  • LP-463TB-09-01 (Cold Impact Tests – Bonded Moldings, Die-Cast Ornaments, and Appliques)
  • Daimler 49-00023

Essais Ford

  • CETP 00.00-L-467 (Global Laboratory Accelerated Cyclic Corrosion Test)
  • CETP 00.00-L-3190
  • FLTM BI 103-01 (Salt Spray Resistance Test for Painted Panels and Parts)
  • FLTM BI 104-01 (Water Immersion Test for Painted Parts and Panels)
  • FLTM BI 104-04 (Adhesion/Immersion Test)
  • FLTM BI 106-01 (Coating Adhesion Test
  • FLTM BI 108-01 (Impact Test for Painted Panels)
  • FLTM BI 110-01 (Measurement of the Gloss of Paint Panels)
  • FLTM BI 113-01 (Water and Soap Spotting Test for Paint)
  • FLTM BI 117-01 (Thickness Measurement of Paint Films)
  • FLTM BI 123-01 (Painted Sheet Metal Corrosion Test)
  • FLTM BI 123-02 (Coated Fastener Corrosion Test)
  • FLTM BI 123-03 (Component Corrosion Test)
  • FLTM BI 151-01 (Pencil Hardness of Paint Films)
  • FLTM BN 015-06 (Wear Resistance of Trim Materials – Taber Method)
  • FLTM BN 102-01 (Polymeric Materials – Low Temperature Flexibility)
  • FLTM BN 108-02 (Resistance to Abrasion – Taber Abraser)
  • FLTM BN 108-13 (Resistance to Scratching)
  • FLTM BN 113-03 (Extended Heat Aging of Polymeric Coated Fabrics)
  • FLTM BN 115-07 (Compression Set of Polyurethane Foam)
  • FLTM BN 117-01 (Determination of the Effect of Fadeometer Aging on Tensile Strength)
  • FLTM BN 117-03 (Evaluation of Trim Materials after Accelerated Exposure in a Controlled Irradiance Water Cooled Xenon Arc Apparatus)
  • FLTM BN 150-04 (Determination of Tensile Strength and Elongation of Flexible Trim)
  • FLTM BO 012-01 (Resistance of Polyurethane Foam to Deterioration)
  • FLTM BO 013-02 (Indentation Test for Flexible Polyurethane Foam)
  • FLTM BO 113-03 (Load Deflection Test)
  • FLTM BO 115-01 (Plastics – Resistance to Artificial Weathering)
  • FLTM BO 115-02 (Resistance of Plastics to Artificial Weathering)
  • FLTM BO 116-01 (Exposure of Interior Trim Materials in a Controlled Irradiance Water Colec Xenon-Arc Apparatus)
  • FLTM BO 117-02 (Impact Test for Plastics)
  • FLTM BO 129-01 (Water Immersion – Dimensional Stability of Elastomers and Plastics)
  • FLTM BO 129-02 (Water Absorption – Elastomers and Plastics)
  • FLTM BO 151-01 (Resistance to Low Temperature Impact)
  • FLTM BQ 104-02 (Humidity Resistance Testing)
  • FLTM BQ 104-07 (Environmental Test Cycles)
  • FLTM BV 001-06 (Overlap Shear Adhesion Test for Adhesives and Sealants)
  • TM 00.00-L-467

Essais GM

  • GM 3601M (Adhesion Requirements of Bonded Exterior Trim)
  • GGM 3602M (Adhesion Requirements of Bonded Interior Assemblies)
  • GGM 3602M (Adhesion Requirements of Exterior Trim attached with Pressure Sensitive Adhesive Tape)
  • GM 4298P (Salt Spray Test)
  • GM 4465P (Water Fog Humidity Test)
  • GM 9071P (Tape Adhesion Test for Paint Finishes)
  • GM 9082P (Test for Wear Resistance of Plastics)
  • GM 9101P (Test for Evaluating Paint Film Distinctness of Image)
  • GM 9125P (Procedures for Laboratory Accelerated Exposure of Automotive Materials)
  • GM 9131P (Color Changes due to Temperature or Humidity)
  • GM 99172P (Sunlamp Exposure Test)
  • GM 9200P (Accelerated Aging and Steaming)
  • GM 9207P (Fastening Strengths of Hook and Loop Tapes)
  • GM 9216P (Coating Adhesion of Vinyl Coated Materials)
  • GM 9307P (Aging Test for Vinyl Compounds and/or Parts)
  • GM 9327P (Exterior Weatherability of Integrally Colored Plastics)
  • GM 9329P (High Temperature Humidify Aging)
  • GM 9502P (Knife Cross-Hatch Adhesion Test)
  • GM 9503P (Evaluating Brittleness of Painted Plastics and Sealants by Means of a Mandrel
  • GM 9504P (Oven Aging Test Procedure for Painted Plastic Substrates)
  • GM 9505P (Automotive Environmental Cycles)
  • GM 9515P (Abrasion Resistance of Organic Coatings (Taber Abraser Method))
  • GM 9518P (Determining Paint Thickness of Painted Flexible Plastic Parts)
  • GM 9525P (Thermal Shock Test for Paint Adhesion)
  • GM 9758P (Adhesion and Durability of Exterior Trims)
  • GMW 14124 (Automotive Environmental Cycles)
  • GMW 14127 (Impact Cold Crack)
  • GMW 14162 (Colorfastness to Artificial Weathering)
  • GMW 14334 (Chemical Resistance to Fluids)
  • GMW 14445 (Sunscreen and Insect Repellent Resistance)
  • GMW 14729 (Procedures for High Humidity Test)
  • GMW 14829 (Tape Adhesion Test for Paint Finishes)
  • GMW 14872 (Cyclic Corrosion Laboratory Test)
  • GMW 15919 (Thermal Shock Test for Paint Adhesion)
  • GMW 3010 (Determination of Tensile and Elongation Properties)
  • GMW 3286 (Neutral Salt Spray (NSS) Test)
  • GMW 3044 (3.4) (Zinc Plating)
  • GMW 3172 (2015) (General Specifications for Electrical/Electronic Components 0 Environmental Durability)
  • GMW 4700 (3.6) (Zinc Alloy Plating)

Essais Honda

  • JIS B 7754 (Xenon Arc)
  • HES D 6501 (Coatings)
  • Honda 5100Z-SEO-0000 (6-2-2)
  • Honda 5100Z-SGO-A000 (6-2-2)
  • Honda 5100Z-TR0-6000 (6.10)
  • Honda 5100Z-TR0-6001 (6.10)
  • Honda 6320Z-TK4-A000 (3.6)
  • Honda 9000Z-T2A-A000 (6.3)
  • Honda 9000Z-SJA-A000 (6.3)
  • Honda HES D2003 (5.3)
  • Honda HES D6001 (4.3)

Essais Nissan

  • NES M0131 (Methods of High Temperature Test for Passenger Compartment Synthetic Resin Parts)
  • NES M0132 (Thermal Cycle Test Methods for Plastic Parts)
  • NES M0135 (Weatherability and Light Resistance Test Methods for Synthetic Resin Parts)
  • NES M0136 (Abrasion Resistance Test Methods for Plastic Parts)
  • NES M0140 (Salt Spray Testing)
  • NES M0142 (Physical Testing Methods for Vulcanized Rubber)
  • Nissan 92111NDS00
  • Nissan NES M0158
  • Nissan NES M0007 (33.4)

Essais SAE

  • SAE AMS-STD-753 (Corrosion-Resistant Steel Parts: Sampling, Inspection and Testing for Surface Passivation)
  • SAE AMS-2403 (Plating, Nickel, General Purpose)
  • SAE AMS-3095 (Paint, Gloss, Airline Exterior System)
  • SAE J575 (Test Methods and Equipment for Lighting Devices for Use on Vehicles Less Than 2032 mm in Overall Width)
  • SAE J1455 (Recommended environmental practices for electronic equipment design in heavy-duty vehicle applications)
  • SAE J1545 (Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim)
  • SAE J1717 (Interior Automotive Plastic Part Testing)
  • SAE J1756 (Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water-Cooled Xenon Arc Apparatus)
  • SAE J1885 (Acceletated Exposure of Automotive Interior Trim Components using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus)
  • SAE J1959 (Corrosion Preventive Compound, Underbody Vehicle Corrosion Protection)
  • SAE J1960 (Accelerated Exposure of Automotive Exterior Materials using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus)
  • SAE J2019 (Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Air-Cooled Xenon-Arc Apparatus)
  • SAE J2020 (Accelerated Exposure of Automotive Exterior Materials using a Fluorescent UV and Condensation Apparatus)
  • SAE J2212 (Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Air-Cooled Xenon-Arc Apparatus)
  • SAE J2334 (Laboratory Cyclic Corrosion Test)
  • SAE J2412 (Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus)
  • SAE J2527 (Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Xenon-Arc Apparatus)
  • SAE J2633 (Wheel and Wheel Trim Weathering Testing for Paint Coatings)
  • SAE J2721 (Recommended Corrosion Test Methods for Commercial Vehicle Components)
  • SAE J2842 (R-1234yf and R744 Design Criteria and Certification for OEM Mobile Air Conditioning Evaporator and Service Replacements)
  • SAE J315 (Fiberboard Test Procedure)
  • SAE J323 (Test Method for Determining Cold Cracking of Flexible Plastic Materials)
  • SAE J949 (Test Method for Determining Stiffness of Interior Trim Materials and Substrated by a Three Point Bending Test)

Finis de surface

  • Essais de Weather-Ometer®️*, Q-UV,  exposition aux UV (ASTM G155, G 154)
  • Essais en chambre – cyclage température / humidité
  • Taber Abrasion – ASTM D4060
  • Gloss ASTM D523
  • Salt spray (ASTM B117)
  • Scratch resistance (ASTM D3363)
  • Corrosion resistance (JIS H8502)
  • Paint Test (MPAPS GT-Paint)

Propriétés de matériaux

  • Tensile Strength – ASTM D638, D1623, D2990, D5574
  • Compressive Strength – ASTM D695, D2990,  D4762
  • Flexural Strength – ASTM D790, D3043, D5616
  • Foam – ASTM D3574
  • Moisture Absorption – ASTM D570
  • Particle Board Testing – ASTM D1037
  • Specular Gloss – ASTM D523
  • Conical Mandrel – ASTM D522
  • Hardness – ASTM D2240
  • Color Measurement – ASTM D2244
  • Abrasion Resistance – ASTM D4060
  • Flatwise Tensile Strength of Sandwich Constructions – ASTM C297
  • Coating Film Thickness – ASTM D1196
  • Paint Adhesion – ASTM D3359
  • Salt fog exposure – ASTM B117
  • Flammability – GMW 3232, ISO 3795

Essais mécaniques

    • ISO 14589 Bind Rivets

ISO-14589-Blind-rivets-Mechanical-Testing

Apprenez-en plus sur ce que Micom peut faire pour l’industrie automobile.

La vidéo suivante montre un réservoir à essence de 400 litres soumis à un test de pression cyclique spécial à 65C.avi.

Pour plus d’informations sur les services d’essais que nous proposons à l’industrie automobile, veuillez télécharger notre brochure Automotive Testing (en anglais) ci-dessous.

Publications Automotive

*Weather-Ometer® est une marque enregistrée de Atlas Material Testing Technology LLC

Accueil / Automobile

Automobile

Micom offre des essais pour l’industrie automobile pour une panoplie de matériaux, produits et sous-assemblages. Que ce soit pour les essais en chambres climatiques, les essais UV, Les essais de peinture, les essais d’emballage ou encore les essais de matériaux, nos experts se feront un plaisir d’élaborer un programme d’essai adapté à vos besoins.

Ayant en main plusieurs années d’expertise en essai de technologie spécialisée, une expérience étendue et un engagement à prendre soin de nos clients, notre équipe d’experts fait plus que tester vos produits. Micom s’engage à livrer pour l’automobile un service d’essai exceptionnel pour tous ses clients.

Service d’essais

Automotive testing
Overheating gaz lift upon fatigue cycling

Micom offre un large éventail d’essais mécaniques et physico-chimiques pour l’industrie automobile selon différentes méthodes (ASTM, SAE, MIL-STD, ISTA, ANSI, CSA, BRP, GM et plusieurs autres). Nos spécialistes sont aussi en mesure de réaliser des essais de matériaux personnalisés et adaptés à vos besoins afin de rencontrer certains critères spécifiques.

Notre laboratoire nous permet de tester une panoplie de matériaux bruts et produits finis. Que votre besoin soit pour des essais de cyclage thermique, de matériaux composites, de corrosion accélérée ou de vieillissement accéléré, le personnel de Micom est toujours disponible pour vous assister dans vos besoins techniques.

Notre laboratoire d’essai automobile est aussi en mesure de tester des prototypes et sous assemblages afin de simuler une utilisation intensive du produit ou matériaux, afin de valider une conception ou encore investiguer une défaillance en utilisations. Notre laboratoire est accrédité par l’A2LA des Normes selon ISO 17025.

Micom offre un large éventail d’essais de matériaux. Parmi nos clients nous avons Volvo, BRP, Weber et bien d’autres.

Automotive Testing « à la Carte »

Exposition climatique, UV et à la corrosion

Voici quelques uns des tests de vieillissement accéléré que nous offrons:

Essais Chrysler

  • LP-463AB-54-01 (Shear Strength)
  • LP-463CB01-02 (Adhesives Shear Strength of Solvent Release Pressure)
  • LP-463CB-10-01 (Adhesives – Heat Humidity and Cold Aging Test for Adhesives)
  • LP-463DD-07-01 (Plastics – Cold Tests of Plastic Materials)
  • LP-463DD-08-02 (Plastics – Accelerated Service Temperature)
  • LP-463KB-02-01 (Breaking Strength and Elongation Testing of Soft Trim Materials)
  • LP-463KB-03-01 (Tear Strength of Soft Trim Materials)
  • LP-463KB-06-01 (Wear Resistance of Soft Trim Materials)
  • LP-463KB-07-01 (Fadeometer Testing – Automotive Interior Trim)
  • LP-463KB-12-01 (Fabrics – Weatherometer Test of Automotive Type Trim)
  • LP-463KB-21-01 (Wear Resistance of Trim Materials – Taber Method)
  • LP-463KB-25-01 (Fabric – Relative Stiffness in Flexure of Automotive)
  • LP-463LB-10-01 (Bond Strength of Trim Materials)
  • LP-463LB-12-01 (Resistance to Humidity Hot and Cold Cycling of Trim Materials Test)
  • LP-463LB-13-01 (Leather – Heat Aging of Trim Materials)
  • LP-463PB-11-01 (Measurement of Specular Reflection)
  • LP-463PB-15-01 (Adhesion and Toughness)
  • LP-463PB-22-01 (Cycle Testing of Painted Surfaces)
  • LP-463PB-52-01 (Chipping Corrosion Test)
  • LP-463TB-03-01 (Tapes and Films – Peel Strength and Adhesion – Determination of)
  • LP-463TB-09-01 (Cold Impact Tests – Bonded Moldings, Die-Cast Ornaments, and Appliques)
  • Daimler 49-00023

Essais Ford

  • CETP 00.00-L-467 (Global Laboratory Accelerated Cyclic Corrosion Test)
  • CETP 00.00-L-3190
  • FLTM BI 103-01 (Salt Spray Resistance Test for Painted Panels and Parts)
  • FLTM BI 104-01 (Water Immersion Test for Painted Parts and Panels)
  • FLTM BI 104-04 (Adhesion/Immersion Test)
  • FLTM BI 106-01 (Coating Adhesion Test
  • FLTM BI 108-01 (Impact Test for Painted Panels)
  • FLTM BI 110-01 (Measurement of the Gloss of Paint Panels)
  • FLTM BI 113-01 (Water and Soap Spotting Test for Paint)
  • FLTM BI 117-01 (Thickness Measurement of Paint Films)
  • FLTM BI 123-01 (Painted Sheet Metal Corrosion Test)
  • FLTM BI 123-02 (Coated Fastener Corrosion Test)
  • FLTM BI 123-03 (Component Corrosion Test)
  • FLTM BI 151-01 (Pencil Hardness of Paint Films)
  • FLTM BN 015-06 (Wear Resistance of Trim Materials – Taber Method)
  • FLTM BN 102-01 (Polymeric Materials – Low Temperature Flexibility)
  • FLTM BN 108-02 (Resistance to Abrasion – Taber Abraser)
  • FLTM BN 108-13 (Resistance to Scratching)
  • FLTM BN 113-03 (Extended Heat Aging of Polymeric Coated Fabrics)
  • FLTM BN 115-07 (Compression Set of Polyurethane Foam)
  • FLTM BN 117-01 (Determination of the Effect of Fadeometer Aging on Tensile Strength)
  • FLTM BN 117-03 (Evaluation of Trim Materials after Accelerated Exposure in a Controlled Irradiance Water Cooled Xenon Arc Apparatus)
  • FLTM BN 150-04 (Determination of Tensile Strength and Elongation of Flexible Trim)
  • FLTM BO 012-01 (Resistance of Polyurethane Foam to Deterioration)
  • FLTM BO 013-02 (Indentation Test for Flexible Polyurethane Foam)
  • FLTM BO 113-03 (Load Deflection Test)
  • FLTM BO 115-01 (Plastics – Resistance to Artificial Weathering)
  • FLTM BO 115-02 (Resistance of Plastics to Artificial Weathering)
  • FLTM BO 116-01 (Exposure of Interior Trim Materials in a Controlled Irradiance Water Colec Xenon-Arc Apparatus)
  • FLTM BO 117-02 (Impact Test for Plastics)
  • FLTM BO 129-01 (Water Immersion – Dimensional Stability of Elastomers and Plastics)
  • FLTM BO 129-02 (Water Absorption – Elastomers and Plastics)
  • FLTM BO 151-01 (Resistance to Low Temperature Impact)
  • FLTM BQ 104-02 (Humidity Resistance Testing)
  • FLTM BQ 104-07 (Environmental Test Cycles)
  • FLTM BV 001-06 (Overlap Shear Adhesion Test for Adhesives and Sealants)
  • TM 00.00-L-467

Essais GM

  • GM 3601M (Adhesion Requirements of Bonded Exterior Trim)
  • GGM 3602M (Adhesion Requirements of Bonded Interior Assemblies)
  • GGM 3602M (Adhesion Requirements of Exterior Trim attached with Pressure Sensitive Adhesive Tape)
  • GM 4298P (Salt Spray Test)
  • GM 4465P (Water Fog Humidity Test)
  • GM 9071P (Tape Adhesion Test for Paint Finishes)
  • GM 9082P (Test for Wear Resistance of Plastics)
  • GM 9101P (Test for Evaluating Paint Film Distinctness of Image)
  • GM 9125P (Procedures for Laboratory Accelerated Exposure of Automotive Materials)
  • GM 9131P (Color Changes due to Temperature or Humidity)
  • GM 99172P (Sunlamp Exposure Test)
  • GM 9200P (Accelerated Aging and Steaming)
  • GM 9207P (Fastening Strengths of Hook and Loop Tapes)
  • GM 9216P (Coating Adhesion of Vinyl Coated Materials)
  • GM 9307P (Aging Test for Vinyl Compounds and/or Parts)
  • GM 9327P (Exterior Weatherability of Integrally Colored Plastics)
  • GM 9329P (High Temperature Humidify Aging)
  • GM 9502P (Knife Cross-Hatch Adhesion Test)
  • GM 9503P (Evaluating Brittleness of Painted Plastics and Sealants by Means of a Mandrel
  • GM 9504P (Oven Aging Test Procedure for Painted Plastic Substrates)
  • GM 9505P (Automotive Environmental Cycles)
  • GM 9515P (Abrasion Resistance of Organic Coatings (Taber Abraser Method))
  • GM 9518P (Determining Paint Thickness of Painted Flexible Plastic Parts)
  • GM 9525P (Thermal Shock Test for Paint Adhesion)
  • GM 9758P (Adhesion and Durability of Exterior Trims)
  • GMW 14124 (Automotive Environmental Cycles)
  • GMW 14127 (Impact Cold Crack)
  • GMW 14162 (Colorfastness to Artificial Weathering)
  • GMW 14334 (Chemical Resistance to Fluids)
  • GMW 14445 (Sunscreen and Insect Repellent Resistance)
  • GMW 14729 (Procedures for High Humidity Test)
  • GMW 14829 (Tape Adhesion Test for Paint Finishes)
  • GMW 14872 (Cyclic Corrosion Laboratory Test)
  • GMW 15919 (Thermal Shock Test for Paint Adhesion)
  • GMW 3010 (Determination of Tensile and Elongation Properties)
  • GMW 3286 (Neutral Salt Spray (NSS) Test)
  • GMW 3044 (3.4) (Zinc Plating)
  • GMW 3172 (2015) (General Specifications for Electrical/Electronic Components 0 Environmental Durability)
  • GMW 4700 (3.6) (Zinc Alloy Plating)

Essais Honda

  • JIS B 7754 (Xenon Arc)
  • HES D 6501 (Coatings)
  • Honda 5100Z-SEO-0000 (6-2-2)
  • Honda 5100Z-SGO-A000 (6-2-2)
  • Honda 5100Z-TR0-6000 (6.10)
  • Honda 5100Z-TR0-6001 (6.10)
  • Honda 6320Z-TK4-A000 (3.6)
  • Honda 9000Z-T2A-A000 (6.3)
  • Honda 9000Z-SJA-A000 (6.3)
  • Honda HES D2003 (5.3)
  • Honda HES D6001 (4.3)

Essais Nissan

  • NES M0131 (Methods of High Temperature Test for Passenger Compartment Synthetic Resin Parts)
  • NES M0132 (Thermal Cycle Test Methods for Plastic Parts)
  • NES M0135 (Weatherability and Light Resistance Test Methods for Synthetic Resin Parts)
  • NES M0136 (Abrasion Resistance Test Methods for Plastic Parts)
  • NES M0140 (Salt Spray Testing)
  • NES M0142 (Physical Testing Methods for Vulcanized Rubber)
  • Nissan 92111NDS00
  • Nissan NES M0158
  • Nissan NES M0007 (33.4)

Essais SAE

  • SAE AMS-STD-753 (Corrosion-Resistant Steel Parts: Sampling, Inspection and Testing for Surface Passivation)
  • SAE AMS-2403 (Plating, Nickel, General Purpose)
  • SAE AMS-3095 (Paint, Gloss, Airline Exterior System)
  • SAE J575 (Test Methods and Equipment for Lighting Devices for Use on Vehicles Less Than 2032 mm in Overall Width)
  • SAE J1455 (Recommended environmental practices for electronic equipment design in heavy-duty vehicle applications)
  • SAE J1545 (Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim)
  • SAE J1717 (Interior Automotive Plastic Part Testing)
  • SAE J1756 (Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water-Cooled Xenon Arc Apparatus)
  • SAE J1885 (Acceletated Exposure of Automotive Interior Trim Components using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus)
  • SAE J1959 (Corrosion Preventive Compound, Underbody Vehicle Corrosion Protection)
  • SAE J1960 (Accelerated Exposure of Automotive Exterior Materials using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus)
  • SAE J2019 (Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Air-Cooled Xenon-Arc Apparatus)
  • SAE J2020 (Accelerated Exposure of Automotive Exterior Materials using a Fluorescent UV and Condensation Apparatus)
  • SAE J2212 (Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Air-Cooled Xenon-Arc Apparatus)
  • SAE J2334 (Laboratory Cyclic Corrosion Test)
  • SAE J2412 (Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus)
  • SAE J2527 (Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Xenon-Arc Apparatus)
  • SAE J2633 (Wheel and Wheel Trim Weathering Testing for Paint Coatings)
  • SAE J2721 (Recommended Corrosion Test Methods for Commercial Vehicle Components)
  • SAE J2842 (R-1234yf and R744 Design Criteria and Certification for OEM Mobile Air Conditioning Evaporator and Service Replacements)
  • SAE J315 (Fiberboard Test Procedure)
  • SAE J323 (Test Method for Determining Cold Cracking of Flexible Plastic Materials)
  • SAE J949 (Test Method for Determining Stiffness of Interior Trim Materials and Substrated by a Three Point Bending Test)

Finis de surface

  • Essais de Weather-Ometer®️*, Q-UV,  exposition aux UV (ASTM G155, G 154)
  • Essais en chambre – cyclage température / humidité
  • Taber Abrasion – ASTM D4060
  • Gloss ASTM D523
  • Salt spray (ASTM B117)
  • Scratch resistance (ASTM D3363)
  • Corrosion resistance (JIS H8502)
  • Paint Test (MPAPS GT-Paint)

Propriétés de matériaux

  • Tensile Strength – ASTM D638, D1623, D2990, D5574
  • Compressive Strength – ASTM D695, D2990,  D4762
  • Flexural Strength – ASTM D790, D3043, D5616
  • Foam – ASTM D3574
  • Moisture Absorption – ASTM D570
  • Particle Board Testing – ASTM D1037
  • Specular Gloss – ASTM D523
  • Conical Mandrel – ASTM D522
  • Hardness – ASTM D2240
  • Color Measurement – ASTM D2244
  • Abrasion Resistance – ASTM D4060
  • Flatwise Tensile Strength of Sandwich Constructions – ASTM C297
  • Coating Film Thickness – ASTM D1196
  • Paint Adhesion – ASTM D3359
  • Salt fog exposure – ASTM B117
  • Flammability – GMW 3232, ISO 3795

Essais mécaniques

    • ISO 14589 Bind Rivets

ISO-14589-Blind-rivets-Mechanical-Testing

Apprenez-en plus sur ce que Micom peut faire pour l’industrie automobile.

La vidéo suivante montre un réservoir à essence de 400 litres soumis à un test de pression cyclique spécial à 65C.avi.

Pour plus d’informations sur les services d’essais que nous proposons à l’industrie automobile, veuillez télécharger notre brochure Automotive Testing (en anglais) ci-dessous.

Publications Automotive

*Weather-Ometer® est une marque enregistrée de Atlas Material Testing Technology LLC

Devis rapide
Recevez un devis en un
jour ouvrable
Devis rapide
Demandez une consultation
de 15 minutes
Consultation gratuite

Automobile

ASTM B117
ASTM C1442
ASTM C297
ASTM D1654
ASTM D1735
ASTM D2126
ASTM D2240
ASTM D2247
ASTM D2565
ASTM D3359
ASTM D3389
ASTM D4060
ASTM D4145
ASTM D4169
ASTM D4329
ASTM D4798
ASTM D522
ASTM D523
ASTM D610
ASTM D6272
ASTM D638
ASTM D6625
ASTM D6653
ASTM D6944
ASTM D695
ASTM D7869
ASTM D790
ASTM D882
ASTM G154
ASTM G155
ASTM G44
ASTM G85
Essai de corrosion cyclique
Essai de Weather-Ometer®️*
Exposition aux intempéries
ISO 11997-1
ISO 4892
ISO 4892-2
ISO 4892-3
ISO 9227
ISTA 1A
ISTA 1B
ISTA 2A
ISTA 3A
ISTA 3B
ISTA 3E
PV 3929
PV 3930
SAE J1455
SAE J2020
SAE J2334
SAE J2412
SAE J2527
Back To Top